产品概述
描述
The ST1S03 is a step-down DC-DC converter optimized for powering a low voltage digital core in HDD applications and, generally, to replace the high current linear solution when the power dissipation may cause a high heating of the application environment. It provides up to 1.5 A over an input voltage range of 3 V to 16 V. A high switching frequency (1.5 MHz) allows the use of tiny surface-mount components: as well as the resistor divider to set the output voltage value, only an inductor, a Schottky diode and two capacitors are required. Besides, a low output ripple is guaranteed by the current mode PWM topology and by the use of low ESR SMD ceramic capacitors. The device is thermal protected and current limited to prevent damages due to an accidental short-circuit. The ST1S03 device is available in a DFN6D package.
-
所有功能
- Step-down current mode PWM (1.5 MHz) DC-DC converter
- 2% DC output voltage tolerance
- Internal soft-start for STARTUP current limitation and power on delay of 50 - 100 μs
- Typical efficiency: > 70% over all operating conditions
- 1.5 A output current capability
- Not switching quiescent current: max 2.5 mA over temperature range
- Switch VDS: max. 350 mV at ISW= 750 mA
- Uses tiny capacitors and inductors
- Available in DFN6D 3 x 3 mm package with exposed pad
电路原理图
eDesignSuite
eDesignSuite 是一套全面且易于使用的设计辅助工具,旨在帮助您简化系统开发过程,并支持广泛的ST产品。
电源管理设计中心
组件的热电模拟器
信号调节设计工具
NFC/RFID计算器
电源设计工具
LED照明设计工具
数字电源工作台
电源树设计器
AC开关模拟器
整流二极管模拟器
STPOWER Studio
Twister Sim
TVS模拟器
Estimate
PCB热模拟器
有源滤波器
比较器
低侧电流检测
高侧电流检测
NFC电感
UHF链路预算
NFC调谐电路
您可能还会喜欢...
特别推荐
EDA符号、封装和3D模型
样片和购买
| 产品型号 | 供货状态 | Budgetary Price (US$)*/Qty | 从ST订购 | Order from distributors | 包 | 包装类型 | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | Operating temperature (°C) | Operating Temperature (°C) (max) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 最小值 | 最大值 | |||||||||||||
| ST1S03PUR | | | distributors 无法联系到经销商,请联系我们的销售办事处 | |||||||||||
ST1S03PUR 批量生产