L5973D

批量生产
Design Win Education
储存到myST

最高2 A步降开关稳压器

下载数据手册
Order Direct

产品概述

描述

The L5973D is a step down monolithic power switching regulator with a minimum switch current limit of 2.5 A so it is able to deliver more than 2 A DC current to the load depending on the application conditions. The output voltage can be set from 1.235 V to 35 V. The high current level is also achieved thanks to an SO8 package with exposed frame, that allows to reduce the Rth(j-amb) down to approximately 40 °C/W. The device uses an internal P-channel D-MOS transistor (with a typical Rdson of 250 mΩ) as switching element to minimize the size of the external components. An internal oscillator fixes the switching frequency at 250 kHz. Having a minimum input voltage of 4 V only, it is particularly suitable for 5 V bus, available in all computer related applications. Pulse by pulse current limit with the internal frequency modulation offers an effective constant current short circuit protection.

  • 所有功能

    • 2.5 A internal switch
    • Operating input voltage from 4 V to 36 V
    • 3.3 V / (±2%) reference voltage
    • Output voltage adjustable from 1.235 V to 35 V
    • Low dropout operation: 100 % duty cycle
    • 250 kHz internally fixed frequency
    • Voltage feedforward
    • Zero load current operation
    • Internal current limiting
    • Synchronization
    • Adjustable soft-start time
    • Inhibit for zero current consumption
    • Protection against feedback disconnection
    • Thermal shutdown
    阅读更多 阅读较少信息

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Power Management Design Center

Thermal-electrical Simulators for Components

Signal Conditioning Design Tool

NFC/RFID Calculators

Choose design tool:
Power Management Design Center

Power Supply Design Tool

• SMPS design, by topology, by type and by product
• PFC design with analog and digitial control
• Supports various PCB configurations
Choose type:
DC/DC
AC/DC
太阳能电池充电器
Power Management Design Center

LED Lighting Design Tool

• Handles AC-DC and DC-DC design in common topologies
• Displays interactive and annotated schematic
• Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data
Choose type:
DC/DC
AC/DC
Power Management Design Center

Digital Power Workbench

• Provides a step-by-step optimized design of power section and control loop
• Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs
Power Management Design Center

Power Tree Designer

• Specify input/output power for each node in the tree
• Check for consistency
• Design each individual node
Choose design tool:
Thermal-electrical Simulators for Components

AC Switches Simulator

• Select ratings and application waveforms
• Get junction temperature and blocking voltage graphs
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Rectifier Diodes Simulator

• Select ratings and application waveforms
• Estimate power losses
• Search and sort suitable devices
Thermal-electrical Simulators for Components

STPOWER Studio

• Supports long mission profiles
• Provides power loss and temperature graphs
• Helps define heatsink thermal properties
Thermal-electrical Simulators for Components

Twister Sim

• Help select the right ViPOWER Automotive power device
• Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis
• Supports various PCB configurations
Thermal-electrical Simulators for Components

TVS Simulator

• Specify system ratings and surge waveform
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Estimate

• Build simple schematics and firmware inputs in minutes
• Quickly generate reliable estimates of battery life, system power consumption and bill of materials costs
Thermal-electrical Simulators for Components

PCB Thermal Simulator

• Thermal analysis of a PCB from Gerber files.
• Possibility to add heat sources, heat sinks, copper areas and thermal paths.
• Powerful server-side engine for rendering and simulation.
• Thermal results shown graphically via 2D table.
Choose design tool:
Signal Conditioning Design Tool

Active Filters

• Handles multi-stage-designs and common topologies
• Returns circuit component values
• Provides gain, phase and group delay graphs
• Low Pass, High Pass and Band Pass
Signal Conditioning Design Tool

Comparators

• Handles most common configurations
• Returns circuit components values
• Provides I/O signal waveforms
• Inverting, Non Inverting, Window
Signal Conditioning Design Tool

Low side Current Sensing

• Returns circuit component values
• Provides current error graphs
Signal Conditioning Design Tool

High side Current Sensing

• Provides current error graphs.
• Help to select the right High side current sensing and shunt devices.
Choose design tool:
NFC/RFID Calculators

NFC Inductance

• Input geometry and substrate properties
• Get antenna impedance
NFC/RFID Calculators

UHF Link Budget

• Enter forward and reverse link characteristics
• The tool returns link budget estimate
NFC/RFID Calculators

NFC Tuning Circuit

• Enter antenna parameter and matching target
• Select the topology of the matching network
• The tool returns component values for the desired design targets

精选 产品

您可能还会喜欢...

STEVAL-ISA101V1

基于L5973D的2 A DC步降开关稳压器，输入电压范围4 V/36 V

特别推荐

EDA符号、封装和3D模型

意法半导体 - L5973D

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Start your design with UltraLibrarian
Start your design with SamacSys
Symbols

符号

Footprints

封装

3D model

3D模型

所有资源

展开所有类别
资源标题
版本
更新时间

SPICE models (1)

资源标题
版本
更新时间
X597X Pspice model
22 Sep 2016
22 Sep 2016
X597X Pspice model

质量与可靠性

产品型号 Marketing Status 包 等级规格 符合RoHS级别 Longevity Commitment Longevity Starting Date 材料声明**
L5973D
批量生产
PowerSO-8 工业 Ecopack2 10 2023-06-06T00:00:00.000+02:00
L5973D013TR
批量生产
PowerSO-8 工业 Ecopack2 10 2023-06-06T00:00:00.000+02:00

L5973D

Package:

PowerSO-8

Material Declaration**:

PDF XML
More Info

Marketing Status

批量生产

Package

PowerSO-8

Grade

Industrial

RoHS Compliance Grade

Ecopack2

L5973D013TR

Package:

PowerSO-8

Material Declaration**:

PDF XML
More Info

Marketing Status

批量生产

Package

PowerSO-8

Grade

Industrial

RoHS Compliance Grade

Ecopack2

(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持。

样片和购买

(*) 建议转售单价（美元）仅用于预算用途。如需以当地货币计价的报价，请联系您当地的 ST销售办事处 或我们的 经销商。

产品

搜索历史

收藏

Please log in  to show your saved searches.

▼

您知道吗？

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

您可以开始跟踪此产品，以便在新的资源、工具和软件可用时接收更新。操作很简单，只需要1分钟。

您可以开始跟踪此产品，以便在新的资源、工具和软件可用时接收更新。操作很简单，只需要1分钟。

您可以开始跟踪此产品，以便在新的资源、工具和软件可用时接收更新。操作很简单，只需要1分钟。

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

您可以开始跟踪此产品，以便在新的资源、工具和软件可用时接收更新。操作很简单，只需要1分钟。

请仔细阅读我们的隐私声明，了解我们将如何处理您的个人资料信息，以保障您个人数据的安全。

现在，您订阅了
- L5973D

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.