STM32F101C4

概述

开始

Partner products

銷售公文包

Please enter your desired search query and search again

产品概述

描述

The STM32F101x4 and STM32F101x6 Low-density access line family incorporates the high-performance ARM Cortex^®-M3 32-bit RISC core operating at a 36 MHz frequency, high-speed embedded memories (Flash memory of 16 to 32 Kbytes and SRAM of 4 to 6 Kbytes), and an extensive range of enhanced peripherals and I/Os connected to two APB buses. All devices offer standard communication interfaces (one I²C, one SPI, and two USARTs), one 12-bit ADC and up to two general-purpose 16-bit timers.

The STM32F101xx Low-density access line family operates in the –40 to +85 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

The STM32F101xx Low-density access line family includes devices in three different packages ranging from 36 pins to 64 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.

These features make the STM32F101xx Low-density access line microcontroller family suitable for a wide range of applications such as application control and user interface, medical and handheld equipment, PC peripherals, gaming and GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, Video intercoms, and HVACs.

所有功能
Core: ARM^®32-bit Cortex^®-M3 CPU

36 MHz maximum frequency,1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access

Single-cycle multiplication and hardware division

存储器

16 to 32 Kbytes of Flash memory

4 to 6 Kbytes of SRAM

Clock, reset and supply management

2.0 to 3.6 V application supply and I/Os

POR, PDR and programmable voltage detector (PVD)

4-to-16 MHz crystal oscillator

Internal 8 MHz factory-trimmed RC

Internal 40 kHz RC

PLL for CPU clock

32 kHz oscillator for RTC with calibration

Low power

Sleep, Stop and Standby modes

VBAT supply for RTC and backup registers

Debug mode

Serial wire debug (SWD) and JTAG interfaces

DMA

7-channel DMA controller

Peripherals supported: timers, ADC, SPIs, I²Cs and USARTs
1 × 12-bit, 1 μs A/D converter (up to 16 channels)

Conversion range: 0 to 3.6 V

Temperature sensor

Up to 51 fast I/O ports

26/37/51 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

Up to 5 timers

Up to two16-bit timers, each with up to 4 IC/OC/PWM or pulse counter

2 watchdog timers (Independent and Window)

SysTick timer: 24-bit downcounter

Up to 4 communication interfaces

1 x I²C interface (SMBus/PMBus)

Up to 2 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)

1 × SPI (18 Mbit/s)

CRC calculation unit, 96-bit unique ID

ECOPACK^®packages
阅读更多阅读较少信息