L98GD8E
批量生产
Design Win
Automotive fully configurable 8-channel High/Low side MOSFET pre-driver suitable for systems at 48 V

下载数据手册

产品概述

描述

The L98GD8E is an 8-channel MOSFET pre-driver configurable for low-side, high-side, peak and hold and H-Bridge load control. It is designed to comply with the requirements of automotive passenger vehicles with 12 V and 48 V battery systems, as well as automotive commercial vehicles with 24 V battery systems.

All outputs can be PWM controlled. Six outputs are capable of driving safety relevant loads. One output can be dedicated to the actuation of safety relevant loads requiring a dedicated enable pin (EN6).

The device offers the possibility of controlling two independent H-Bridges.

The device can also drive up to two loads requiring "peak & hold" control strategy.

The driver outputs are protected against short circuit condition.

The device protects the external MOS in case of an overcurrent event.

Each output provides full diagnostic information such as short to battery, short to ground and open-load. Each output status can be constantly monitored through dedicated SPI registers.

The voltage slew rate of the external transistors 1-8 is controlled during turn ON and turn OFF in order to improve EMI behavior.

A double, redundant, external disable source is available through DIS and NDIS pins in order to improve safety.

The device is configurable via SPI through a 32-bit protocol.

  • 所有功能

    • AEC-Q100 qualified
    • Designed to meet ISO21780
    • 48 V, 24 V, 12 V battery systems compliance
    • 3.3 V and 5 V logic compatible I/O
    • 8-channel configurable MOSFET pre-driver
      • High-side (N-channel and P-channel MOS)
      • Low-side (N-channel MOS)
      • H-bridge (up to 2 H-bridge)
      • Peak & Hold (2 loads)
    • Operating battery supply voltage 3.8 V to 70 V
    • Operating VDD supply voltage 4.5 V to 5.5 V
    • Programmable gate charge/discharge currents for improving EMI behavior
    • Individual diagnosis for:
      • Short circuit to battery
      • Open load
      • Short circuit to ground
    • Highly flexible overcurrent sensing implementation
      • Possibility of monitoring external MOS drain to source voltage
      • Possibility of monitoring voltage on external shunt resistor
      • 64 programmable overcurrent thresholds independent for each channel
      • Ultra-fast output shutdown in case of overcurrent
    • Current limitation for H-Bridge configuration
    • 32-bit SPI protocol available for configuration and diagnostics
      • Failures latched even if they occur during diagnostics reading
      • Daisy chain operation
      • SDO protected against overvoltage
    • Safety features
      • Fast switch off redundant output disable by two external pins
      • Built In Self Test (BIST) for logic operation
      • Hardware Self Check (HWSC) for VDD5 overvoltage comparator
      • Configurable Communication Check (CC) watchdog timer available
      • Disable feedback by bi-directional pin
      • Highly redundant output monitoring by dedicated SPI registers
    • 10-bit ADC for battery and die temperature measurements available by SPI
    • VDD5 monitoring for over/under voltage
    • VPS (battery) monitoring for under voltage

EDA符号、封装和3D模型

意法半导体 - L98GD8E

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Symbols

符号

Footprints

封装

3D model

3D模型

质量与可靠性

料号 Marketing Status 等级规格 符合RoHS级别 Longevity Commitment Longevity Starting Date 材料声明**
L98GD8ETR
批量生产
TQFP 64 10x10x1.0 汽车应用 Ecopack2 - -

L98GD8ETR

Package:

TQFP 64 10x10x1.0

Material Declaration**:

Marketing Status

批量生产

Package

TQFP 64 10x10x1.0

Grade

Automotive

RoHS Compliance Grade

Ecopack2

(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此,它们可能不是100%适用于特定的设备。有关特定设备的信息,请联系 销售支持

样片和购买

Loading...
料号
供货状态
Budgetary Price (US$)*/Qty
从ST订购
Order from distributors
包装类型
RoHS
Country of Origin
ECCN (US)
ECCN (EU)
Operating temperature (°C)
最小值
最大值
L98GD8ETR

经销商的可用性 L98GD8ETR

代理商名称
地区 库存 最小订购量 第三方链接

代理商库存报告日期:

无法联系到经销商,请联系我们的销售办事处

L98GD8ETR 批量生产

Budgetary Price (US$)*/Qty:
-
包:
包装类型:
RoHS:
Country of Origin:
ECCN (US):
ECCN (EU):

料号:

L98GD8ETR

Operating Temperature (°C)

Min:

Max:

代理商名称

代理商库存报告日期:

(*) 建议转售单价(美元)仅用于预算用途。如需以当地货币计价的报价,请联系您当地的 ST销售办事处 或我们的 经销商