TSU111

批量生产
Design Win Education Education
储存到myST

纳功率（900 nA）高精度（150 μV）5V CMOS运算放大器

下载数据手册
Order Direct

产品概述

描述

The TSU111, TSU112 and the TSU114 operational amplifiers (op-amp) offer an ultra low-power consumption per channel of 900 nA typical and 1.2 µA maximum when supplied by 3.3 V. Combined with a supply voltage range of 1.5 V to 5.5 V, these features allow the TSU11x to be efficiently supplied by a coin type Lithium battery or a regulated voltage in low-power applications.

The high accuracy of 150 µV max. and 11.5 kHz gain bandwidth make the TSU11x ideal for sensor signal conditioning, battery supplied, and portable applications.

  • 所有功能

    • Sub-micro ampere current consumption: Icc = 900 nA typ. at 25 °C
    • Low offset voltage: 150 µV max. at 25 °C, 235 µV max. over full temperature range (-40 to 85 °C)
    • Low noise over 0.1 to 10 Hz bandwidth: 3.6 µVpp
    • Low supply voltage: 1.5 V to 5.5 V
    • Rail-to-rail input and output
    • Gain bandwidth product: 11.5 kHz typ.
    • Low input bias current: 10 pA max. at 25 °C
    • High tolerance to ESD: 4 kV HBM
    • More than 25 years of typical equivalent lifetime supplied by a 220 mA.h CR2032 coin type Lithium battery
    • High accuracy without calibration
    • Tolerance to power supply transient drops
    阅读更多 阅读较少信息

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Power Management Design Center

Thermal-electrical Simulators for Components

Signal Conditioning Design Tool

NFC/RFID Calculators

Choose design tool:
Power Management Design Center

Power Supply Design Tool

• SMPS design, by topology, by type and by product
• PFC design with analog and digitial control
• Supports various PCB configurations
Choose type:
DC/DC
AC/DC
太阳能电池充电器
Power Management Design Center

LED Lighting Design Tool

• Handles AC-DC and DC-DC design in common topologies
• Displays interactive and annotated schematic
• Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data
Choose type:
DC/DC
AC/DC
Power Management Design Center

Digital Power Workbench

• Provides a step-by-step optimized design of power section and control loop
• Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs
Power Management Design Center

Power Tree Designer

• Specify input/output power for each node in the tree
• Check for consistency
• Design each individual node
Choose design tool:
Thermal-electrical Simulators for Components

AC Switches Simulator

• Select ratings and application waveforms
• Get junction temperature and blocking voltage graphs
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Rectifier Diodes Simulator

• Select ratings and application waveforms
• Estimate power losses
• Search and sort suitable devices
Thermal-electrical Simulators for Components

STPOWER Studio

• Supports long mission profiles
• Provides power loss and temperature graphs
• Helps define heatsink thermal properties
Thermal-electrical Simulators for Components

Twister Sim

• Help select the right ViPOWER Automotive power device
• Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis
• Supports various PCB configurations
Thermal-electrical Simulators for Components

TVS Simulator

• Specify system ratings and surge waveform
• Search and sort suitable devices
Thermal-electrical Simulators for Components

Estimate

• Build simple schematics and firmware inputs in minutes
• Quickly generate reliable estimates of battery life, system power consumption and bill of materials costs
Choose design tool:
Signal Conditioning Design Tool

Active Filters

• Handles multi-stage-designs and common topologies
• Returns circuit component values
• Provides gain, phase and group delay graphs
• Low Pass, High Pass and Band Pass
Signal Conditioning Design Tool

Comparators

• Handles most common configurations
• Returns circuit components values
• Provides I/O signal waveforms
• Inverting, Non Inverting, Window
Signal Conditioning Design Tool

Low side Current Sensing

• Returns circuit component values
• Provides current error graphs
Signal Conditioning Design Tool

High side Current Sensing

• Provides current error graphs.
• Help to select the right High side current sensing and shunt devices.
Choose design tool:
NFC/RFID Calculators

NFC Inductance

• Input geometry and substrate properties
• Get antenna impedance
NFC/RFID Calculators

UHF Link Budget

• Enter forward and reverse link characteristics
• The tool returns link budget estimate
NFC/RFID Calculators

NFC Tuning Circuit

• Enter antenna parameter and matching target
• Select the topology of the matching network
• The tool returns component values for the desired design targets

精选 产品

您可能还会喜欢...

P-NUCLEO-IKA02A1

STM32 Nucleo套件：电化学有毒气体传感器扩展板和CO传感器

STSW-eDSim

eDSim：快速且功能强大的电气仿真软件，用于SMPS和模拟IC

特别推荐

EDA符号、封装和3D模型

意法半导体 - TSU111

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Start your design with UltraLibrarian
Start your design with SamacSys
Symbols

符号

Footprints

封装

3D model

3D模型

所有资源

展开所有类别
资源标题
版本
更新时间

SPICE models (1)

资源标题
版本
更新时间
TSU111 PSpice model
20 Feb 2017
20 Feb 2017
TSU111 PSpice model

SIMetrix models (1)

资源标题
版本
更新时间
TSU111 SIMetrix examples schematics
2023.07 12 Feb 2024
12 Feb 2024
TSU111 SIMetrix examples schematics 2023.07

质量与可靠性

产品型号 Marketing Status 包 等级规格 符合RoHS级别 材料声明**
TSU111ICT
批量生产
SC70-5 工业 Ecopack3
TSU111IQ1T
批量生产
QFN-6L P 0.4 mm 工业 Ecopack3

TSU111ICT

Package:

SC70-5

Material Declaration**:

PDF XML
More Info

Marketing Status

批量生产

Package

SC70-5

Grade

Industrial

RoHS Compliance Grade

Ecopack3

TSU111IQ1T

Package:

QFN-6L P 0.4 mm

Material Declaration**:

PDF XML
More Info

Marketing Status

批量生产

Package

QFN-6L P 0.4 mm

Grade

Industrial

RoHS Compliance Grade

Ecopack3

(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持。

样片和购买

(*) 建议转售单价（美元）仅用于预算用途。如需以当地货币计价的报价，请联系您当地的 ST销售办事处 或我们的 经销商。

产品

搜索历史

收藏

Please log in  to show your saved searches.

▼

您知道吗？

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

您可以开始跟踪此产品，以便在新的资源、工具和软件可用时接收更新。操作很简单，只需要1分钟。

您可以开始跟踪此产品，以便在新的资源、工具和软件可用时接收更新。操作很简单，只需要1分钟。

您可以开始跟踪此产品，以便在新的资源、工具和软件可用时接收更新。操作很简单，只需要1分钟。

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

您可以开始跟踪此产品，以便在新的资源、工具和软件可用时接收更新。操作很简单，只需要1分钟。

请查看我们的隐私声明，该声明描述了我们如何处理您的个人资料信息以及如何维护您的个人数据保护权利

现在，您订阅了
- TSU111

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.