ST25R3918

概述

开始

Partner products

銷售公文包

Please enter your desired search query and search again

产品概述

描述

The ST25R3918 is a multipurpose NFC transceiver supporting NFC reader, passive peer to peer functionality and NFC card emulation mode.

This IC is optimized for IOT and other consumer or industrial applications where excellent analog performance is required.

The ST25R3918 is also optimized to achieve good read ranges with low output power, even under noisy and harsh environments, using noise reduction receiver technology.

This IC offers an advanced analog front end (AFE) and a highly integrated data framing system for NFC-A/B (ISO 14443A/B) reader including higher bit rates. NFC-V (ISO 15693) reader is supported up to 53 kbps via streaming mode to read cards.

ISO 18092 passive initiator and target and NFC-A / NFC-F card emulation are also available to ensure communication between end products. This enables device programming or simple NDEF data transfers to interact with Android™ phones or to use Apple^® App Clips.

Special stream and transparent modes of the AFE and framing system can be used to implement other custom protocols in reader or card emulation mode.

The ST25R3918 includes a low power wakeup mode to scan for the presence of a card by performing a measurement of the amplitude or phase of the antenna signal. It also contains a low power RC oscillator and wake-up timer to automatically trigger the device after the configured time period and check for a presence of a tag.

The ST25R3918 is designed to operate from a wide power supply range (2.6 to 5.5 V from -40 °C to +105 °C, 2.4 to 5.5 V from -20 °C to +105 °C), and a wide peripheral IO voltage range (from 1.65 to 5.5 V).

所有功能
Operating modes

Reader/writer

Card emulation

Passive peer to peer

RF communication

NFC-A / ISO14443A up to 848 kbit/s

NFC-B / ISO14443B up to 848 kbit/s

NFC-V / ISO15693 up to 53 kb/s

NFC-A / ISO14443A and NFC-F / FeliCa™ card emulation

Low level modes to implement MIFARE Classic^® compliant or other custom protocols

主要特性

Dynamic power output (DPO) controls the field strength to stay within given limits

Active wave shaping (AWS) reduces over-and under-shoots

Noise suppression receiver (NSR) allows reception in noisy environment

Automatic gain control and squelch feature to maximize SNR

Low power inductive card detection

Low power NFC passive target modes

Adjustable ASK modulation depth, from 5 to 40%

Integrated regulators to boost system PSRR

AM/PM and I/Q demodulator with baseband channel summation or automatic channel selection

Possibility to drive two independent single ended antennas

Measurement of antenna voltage amplitude and phase, RSSI, on-chip supply and regulated voltages

External communication interfaces

512-byte FIFO

Serial peripheral interface (SPI) up to 10 Mbit/s

I2C with up to 400 kbit/s in Fast-mode, 1 Mbit/s in Fast-mode Plus, and 3.4 Mbit/s in High-speed mode

Electrical characteristics

Wide supply voltage and ambient temperature range (2.6 to 5.5 V from -40 °C to +105 °C, 2.4 to 5.5 V from -20 °C to +105 °C)

Wide peripheral communication supply range, from 1.65 to 5.5 V

Quartz oscillator capable of operating with 27.12 MHz crystal with fast start-up
阅读更多阅读较少信息