产品概述
描述
The L293B and L293E are quad push-pull drivers capable of delivering output currents to 1A per channel. Each channel is controlled by a TTL-compatible logic input and each pair of drivers (a full bridge) is equipped with an inhibit input which turns off all four transistors. A separate supply input is provided for the logic so that it may be run off a lower voltage to reduce dissipation.
Additionally, the L293E has external connection of sensing resistors, for switchmode control.
The L293B and L293E are package in 16 and 20-pin plastic DIPs respectively ; both use the four center pins to conduct heat to the printed circuit board.
-
所有功能
- OVERTEMPERATURE PROTECTION
- OUTPUT CURRENT 1A PER CHANNEL
- INHIBIT FACILITY
- PEAK OUTPUT CURRENT 2A PER CHANNEL (non repetitive)
- SEPARATE LOGIC SUPPLY
- HIGH NOISE IMMUNITY
电路原理图
EDA符号、封装和3D模型
意法半导体 - L293E
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
符号
封装
3D模型