STM8S005K6

概述

开始

Partner products

銷售公文包

Please enter your desired search query and search again

产品概述

描述

The STM8S005C6/K6 value line 8-bit microcontrollers offer 32 Kbytes of Flash program memory, plus 128 bytes of data EEPROM. They are referred to as medium-density devices in the STM8S microcontroller family reference manual (RM0016).

All devices of STM8S005C6/K6 value line provide the following benefits:performance, robustness, reduced system cost and short development cycles.

Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system.

The system cost is reduced thanks to a high system integration level with internal clock oscillators, watchdog, and brown-out reset.

The common family product architecture with compatible pinout, memory map and modular peripherals allow application scalability and reduced development cycles.

All products operate from a 2.95 V to 5.5 V supply voltage.

Full documentation is offered as well as a wide choice of development tools.

所有功能
内核

Max f_CPU: 16 MHz

Advanced STM8 core with Harvard architecture and 3-stage pipeline

Extended instruction set

存储器

Medium-density Flash/EEPROM
Program memory: 32 Kbytes of Flash memory; data retention 20 years at 55 °C after 100 cycles
Data memory: 128 bytes true data EEPROM; endurance up to 100 k write/erase cycles

RAM: 2 Kbytes

Clock, reset and supply management

2.95 V to 5.5 operating voltage

Flexible clock control, 4 master clock sources
Low-power crystal resonator oscillator
External clock input
Internal, user-trimmable 16 MHz RC
Internal low-power 128 kHz RC

Clock security system with clock monitor

Power management
Low-power modes (wait, active-halt, halt)
Switch-off peripheral clocks individually
Permanently active, low-consumption power-on and power-down reset

Interrupt management

Nested interrupt controller with 32 interrupts

Up to 37 external interrupts on 6 vectors

计时器

2x 16-bit general purpose timers, with 2+3 CAPCOM channels (IC, OC or PWM)

Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization

8-bit basic timer with 8-bit prescaler

Auto wakeup timer

Window and independent watchdog timers

Communications interfaces

UART with clock output for synchronous operation, SmartCard, IrDA, LIN

SPI interface up to 8 Mbit/s

I²C interface up to 400 Kbit/s

Analog to digital converter (ADC)

10-bit ADC, ± 1 LSB ADC with up to 10 multiplexed channels, scan mode and analog watchdog

I/Os

Up to 38 I/Os on a 48-pin package including 16 high-sink outputs

Highly robust I/O design, immune against current injection

Development support

Embedded single-wire interface module (SWIM) for fast on-chip programming and non-intrusive debugging
阅读更多阅读较少信息