STM32F722IC

概述

开始

Partner products

銷售公文包

Please enter your desired search query and search again

产品概述

描述

The STM32F722xx and STM32F723xx devices are based on the high-performance Arm^® Cortex^®-M7 32-bit RISC core operating at up to 216 MHz frequency. The Cortex^®-M7 core features a single floating point unit (SFPU) precision which supports Arm^® single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances the application security.

The STM32F722xx and STM32F723xx devices incorporate high-speed embedded memories with a Flash memory up to 512 Kbytes, 256 Kbytes of SRAM (including 64 Kbytes of data TCM RAM for critical real-time data), 16 Kbytes of instruction TCM RAM (for critical real-time routines), 4 Kbytes of backup SRAM available in the lowest power modes, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses, a 32-bit multi-AHB bus matrix and a multi layer AXI interconnect supporting internal and external memories access.

All the devices offer three 12-bit ADCs, two DACs, a low-power RTC, thirteen general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers, a true random number generator (RNG). They also feature standard and advanced communication interfaces.

所有功能
Core: Arm^® 32-bit Cortex^®-M7 CPU with FPU, adaptive real-time accelerator (ART Accelerator) and L1-cache: 8 Kbytes of data cache and 8 Kbytes of instruction cache, allowing 0-wait state execution from embedded Flash memory and external memories, frequency up to 216 MHz, MPU, 462 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1) and DSP instructions.

存储器

Up to 512 Kbytes of Flash memory with protection mechanisms (read and write protections, proprietary code readout protection (PCROP))

528 bytes of OTP memory

SRAM: 256 Kbytes (including 64 Kbytes of data TCM RAM for critical real-time data) + 16 Kbytes of instruction TCM RAM (for critical real-time routines) + 4 Kbytes of backup SRAM (available in the lowest power modes)

Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories

Dual mode Quad-SPI

Clock, reset and supply management

1.7 V to 3.6 V application supply and I/Os

POR, PDR, PVD and BOR

Dedicated USB power

4-to-26 MHz crystal oscillator

Internal 16 MHz factory-trimmed RC (1% accuracy)

32 kHz oscillator for RTC with calibration

Internal 32 kHz RC with calibration

Low-power

Sleep, Stop and Standby modes

V_BAT supply for RTC, 32×32 bit backup registers + 4 Kbytes of backup SRAM

3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode

2×12-bit D/A converters

Up to 18 timers: up to thirteen 16-bit (1x low- power 16-bit timer available in Stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWMs or pulse counter and quadrature (incremental) encoder inputs. All 15 timers running up to 216 MHz. 2x watchdogs, SysTick timer

General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
Debug mode

SWD and JTAG interfaces

Cortex^®-M7 Trace Macrocell™

Up to 140 I/O ports with interrupt capability

Up to 136 fast I/Os up to 108 MHz

Up to 138 5 V-tolerant I/Os

Up to 21 communication interfaces

Up to 3× I²C interfaces (SMBus/PMBus)

Up to 4 USARTs/4 UARTs (27 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)

Up to 5 SPIs (up to 54 Mbit/s), 3 with muxed simplex I²Ss for audio class accuracy via internal audio PLL or external clock

2 x SAIs (serial audio interface)

1 x CAN (2.0B active)

2 x SDMMCs

Advanced connectivity

USB 2.0 full-speed device/host/OTG controller with on-chip PHY

USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and on-chip Hi-speed PHY or ULPI depending on the part number

True random number generator

CRC calculation unit

RTC: subsecond accuracy, hardware calendar

96-bit unique ID
阅读更多阅读较少信息