STM32F411VC

概述

样片和购买

解决方案

文件

CAD资源

工具与软件

质量与可靠性

开始

Partner products

銷售公文包

Please enter your desired search query and search again

产品概述

描述

The STM32F411xC/xE devices are based on the high-performance Arm^® Cortex^® -M4 32-bit RISC core operating at a frequency of up to 100 MHz. The Cortex^®-M4 core features a floating-point unit (FPU) single precision, which supports all Arm single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU), which enhances application security.

The STM32F411xC/xE belongs to the STM32 Dynamic Efficiency product line (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing to save even more power consumption during data batching.

The STM32F411xC/xE incorporate high-speed embedded memories (up to 512 Kbytes of flash memory, 128 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB bus and a 32-bit multi-AHB bus matrix.

All devices offer one 12-bit ADC, a low-power RTC, six general-purpose 16-bit timers including one PWM timer for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces.

所有功能
Includes ST state-of-the-art patented technology

Dynamic efficiency line with BAM (Batch acquisition mode)

1.7 V to 3.6 V power supply

- 40°C to 85/105/125 °C temperature range

Core: Arm^® 32-bit Cortex^®-M4 CPU with FPU, adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions

存储器

Up to 512 Kbytes of flash memory

128 Kbytes of SRAM

Clock, reset, and supply management

1.7 V to 3.6 V application supply and I/Os

POR, PDR, PVD, and BOR

4-to-26 MHz crystal oscillator

Internal 16 MHz factory-trimmed RC

32 kHz oscillator for RTC with calibration

Internal 32 kHz RC with calibration

Power consumption

Run: 100 µA/MHz (peripheral off)

Stop (Flash in Stop mode, fast wakeup time): 42 µA typical at 25 °C; 65 µA max at 25 °C

Stop (Flash in Deep power down mode, slow wakeup time): down to 9 µA at 25 °C; 28 µA max at 25 °C

Standby: 1.8 µA at 25 °C / 1.7 V without RTC; 11 µA at 85 °C at 1.7 V

V_BAT supply for RTC: 1 µA at 25 °C

1×12-bit, 2.4 MSPS A/D converter: up to 16 channels

General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support
Up to 11 timers: up to six 16-bit, two 32-bit timers up to 100 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window) and a SysTick timer

Debug mode

Serial wire debug (SWD) & JTAG interfaces

Cortex^Ò-M4 Embedded Trace Macrocell™

Up to 81 I/O ports with interrupt capability

Up to 78 fast I/Os up to 100 MHz

Up to 77 5 V-tolerant I/Os

Up to 13 communication interfaces

Up to 3 x I²C interfaces (SMBus/PMBus)

Up to 3 USARTs (2 x 12.5 Mbit/s, 1 x 6.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control)

Up to 5 SPI/I2Ss (up to 50 Mbit/s, SPI, or I2S audio protocol), SPI2 and SPI3 with muxed full-duplex I²S to achieve audio class accuracy via internal audio PLL or external clock

SDIO interface (SD/MMC/eMMC)

Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with on-chip PHY

CRC calculation unit

96-bit unique ID

RTC: subsecond accuracy, hardware calendar

All packages are ECOPACK2 compliant
阅读更多阅读较少信息