产品概述
描述
The ST7538Q is a Half Duplex synchronous/asynchronous FSK Modem designed for power line communication network applications. It operates from a single supply voltage and integrates a line driver and two linear regulators for 5V and 3.3V. The device operation is controlled by means of an internal register, programmable through the synchronous serial interface. Additional functions as watchdog, clock output, output voltage and current control, preamble detection, time-out, band in use are included. Realized in Multipower BCD5 technology that allows to integrate DMOS, Bipolar and CMOS structures in the same chip.
-
所有功能
- Programmable baud rate up to 4800BPS
- ST7537 compatible
- 8 programmable transmission frequencies
- UART/SPI host interface
- Suitable to application in accordance with EN 50065 CENELEC specifications
- Receiving sensitivity up to 250µVrms
- Band in use detection
- Carrier or preamble detection
- Mains zero crossing detection and synchronization
- Programmable 24 or 48 bit register with security checksum
- Watchdog timer
- Integrated 3.3V voltage regulator (up to 50mA) with short circuit protection
- Integrated 5V voltage regulator (up to 50mA) with short circuit protection
- Half duplex frequency shift keying (FSK) transceiver
- Programmable interface:
Synchronous Asynchronous - Integrated power line driver with programmable voltage and current control
- Very low power consumption (Iq = 5mA)
- 3.3V or 5V digital supply
- 8 or 16 bit header recognition
- Single supply voltage (from 7.5 up to 12.5V)
- Output voltage freeze
EDA符号、封装和3D模型
意法半导体 - ST7538Q
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
符号
封装
3D模型