产品概述
描述
The ST2329A is a 2-bit dual supply level translator which provides the level shifting capability to allow data transfer in a multi-voltage system. Externally applied voltages, VCCand VL, set the logic levels on either side of the device. It utilizes a transmission gate-based design that allows bidirectional level translation without a control pin.
The ST2329A accepts VLfrom 1.65 to 3.6 V and VCCfrom 1.80 to 5.5 V, making it ideal for data transfer between low-voltage ASICs/PLD and higher voltage systems. This device has a tri-state output mode which can be used to disable all I/Os.
The ST2329A supports power-down mode when VCCis grounded/floating and the device is disabled via the OE pin.
-
所有功能
- 18 Mbps (max.) data rate when driven by a totem pole driver
- 6.8 Mbps (max.) data rate when driven by an open drain pole driver
- Bidirectional level translation without direction control pin
- Wide VLvoltage range of 1.65 to 3.6 V
- Wide VCCvoltage range of 1.80 to 5.5 V
- Power-down mode feature: when either supply is off, all I/Os are in high impedance
- Low quiescent current (max. 4 μA)
- Able to be driven by totem pole and open drain drivers
- 5.5 V tolerant enable pin
- ESD performance on all pins: ±2 kV HBM
- Small package and footprint: QFN10 (1.8 x 1.4 mm) package
