产品概要
描述
The Embedded Pi, based on the STM32F103 MCU, is a triple-play platform for Raspberry Pi, Arduino™ and the STM32 MCU family. Blending all three communities together, the Embedded Pi helps you to get the most out of each platform. The Embedded Pi can operate in 3 modes: Standalone, ST-Adapter and Raspberry Pi.
In Standalone mode the Embedded Pi acts as a base platform, the STM32F103 controls the Arduino™ shields directly.
In ST-Adapter mode the Embedded Pi controls the Arduino™ shields, and the Raspberry Pi acts as the GUI or command line console that send commands and data to, and receives data from, the Embedded Pi.
In Raspberry Pi mode the Embedded Pi acts as a hardware connection bridge between the Raspberry Pi and Arduino™ shields.
For more information, visit www.element14.com/embedded-pi
-
性能一览
- STM32F103 running at 72 MHz with 128 Kbytes Flash memory and 20 Kbytes RAM
- Form factor compatible with both 5 V and 3V3 Arduino™ shields, selectable with jumpers
- Hundreds of Arduino™ shields available on the market enhance the control capability of Embedded Pi and Raspberry Pi, e.g. to control motor, sensors, etc.
- Direct connection to the Raspberry Pi
- Selection of one of the three modes of operation with a jumper
- Arduino™ form factor compatible interfaces:
- 1 SPI
- 1 I2C
- 4 PWM
- 1 UART
- 6 analog inputs
- Embedded Pi extended interfaces:
- 1 SPI
- 1 I2C
- 2 PWM
- 1 UART
- 6 analog inputs
- 1 CAN
eDesignSuite
eDesignSuite 是一套全面且易于使用的设计辅助工具，旨在帮助您简化系统开发过程，并支持广泛的ST产品。
电源管理设计中心
组件的热电模拟器
信号调节设计工具
NFC/RFID计算器
电源管理设计中心
电源设计工具
电源管理设计中心
LED照明设计工具
电源管理设计中心
数字电源工作台
电源管理设计中心
电源树设计器
组件的热电模拟器
STPOWER Studio
组件的热电模拟器
PCB Thermal Simulator
组件的热电模拟器
AC开关模拟器
组件的热电模拟器
整流二极管模拟器
组件的热电模拟器
Twister Sim
组件的热电模拟器
TVS模拟器
组件的热电模拟器
Estimate
信号调节设计工具
有源滤波器
信号调节设计工具
比较器
信号调节设计工具
低侧电流检测
信号调节设计工具
高侧电流检测
NFC/RFID计算器
NFC电感
NFC/RFID计算器
UHF链路预算
NFC/RFID计算器
