产品概述
描述
The STEVAL-PTOOL2V1 BLDC driver reference design is tailored for battery-operated power tools using 8S to 15S battery packs. It is based on the STSPIN32F0252 motor controller with embedded 3-phase, 250 V gate driver and low-power STM32 MCU. The power stage is based on the STL130N8F7 power MOSFETs or any similarly rated device in a PowerFlat 5x6 package.
The board implements single shunt sensing topology with both field-oriented control
(FOC) and sensored or sensorless 6-step control supported for driving permanent magnet synchronous motors (PMSM) and brushless DC (BLDC) motors.
The companion 6-step STSW-PTOOL2V1 firmware is ready to use with position feedback from phase Hall-effect sensors.
This reference design can deliver up to 19 A continuous current with very good thermal dissipation performance thanks to the mounted heatsink. It is compatible with a wide input voltage range from 20 to 72 VDC, and includes an auxiliary power stage with the VIPER013 in buck configuration to generate +12V and +3.3V supply voltage required by the application.
The STEVAL-PTOOL2V1 features a potentiometer for speed variation and protection features include thermal shutdown, undervoltage lockout, and overcurrent protection.
This compact 80 mm x 58 mm design is ideal for power tools and any similar battery-operated applications in terms of architecture, rating and performance.
-
所有功能
- Input voltage from 20 VDC to 72 VDC
- Recommended for power tools supplied from 8S to 15S
- Output current up to 19 Arms
- Overcurrent threshold set to 36 A peak
- STSPIN32F0252 featuring
- 250 V, 1 A, 3-phase gate driver
- SmartShutDown OCP
- Cortex-M0 STM32
- STL130N8F7 MOSFETs power stage featuring:
- VDS = 80 V
- RDS(on) max.= 3.6 mΩ
- PowerFlat 5x6 package
- Compact footprint (80 mm x 58 mm)
- Heatsink for best power dissipation performance
- Single shunt current sensing, suitable for:
- Sensored or sensorless 6 step algorithm
- Single-shunt vector (FOC) algorithm
- Digital Hall sensors and encoder input
- Plug-and-play thanks to available six-steps firmware with Hall-effect sensors feedback
- Speed regulation through trimmer
- Fully protected:
- Thermal shutdown
- Undervoltage lockout
- Overcurrent protection
- Bus voltage sensing
- 12 V VCC and 3.3 V VDD supplies
- Serial wire debug (SWD) port for debugging/programming
- UART TX RX interface available
- Easy user interface with buttons and trimmer
您可能还会喜欢...
所有资源
| 资源标题 | 版本 | 更新时间 |
|---|
MCSDK Board Description (1)
| 资源标题 | 版本 | 更新时间 | ||
|---|---|---|---|---|
| ZIP | 1.0 | 07 Oct 2020 | 07 Oct 2020 |
物料清单 (1)
| 资源标题 | 版本 | 更新时间 | ||
|---|---|---|---|---|
| 1.0 | 07 Oct 2020 | 07 Oct 2020 |
Schematic Pack (1)
| 资源标题 | 版本 | 更新时间 | ||
|---|---|---|---|---|
| 1.0 | 07 Oct 2020 | 07 Oct 2020 |
质量与可靠性
| 产品型号 | Marketing Status | 包 | 等级规格 | 符合RoHS级别 | WEEE Compliant | Longevity Commitment | Longevity Starting Date | 材料声明** |
|---|---|---|---|---|---|---|---|---|
| STEVAL-PTOOL2V1 | 批量生产 | CARD | 工业 | Ecopack2 | Yes | - | - | |
STEVAL-PTOOL2V1
Package:
CARDMaterial Declaration**:
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持。
样片和购买
| 产品型号 | 供货状态 | Budgetary Price (US$)*/Qty | 从ST订购 | Order from distributors | 包 | 包装类型 | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | 供应商 | 核心产品 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| STEVAL-PTOOL2V1 | | | distributors 无法联系到经销商，请联系我们的销售办事处 |
|
|
STEVAL-PTOOL2V1 批量生产