STEVAL-ILL042V1

已停产
Design Win

60 W high power factor flyback LED driver demonstration board based on the L6562AT and TSM101

下载数据摘要

产品概述

描述

The STEVAL-ILL042V1 demonstration board is a LED power supply in high PF flyback configuration able to drive a 60 W LED array. The board is based on the L6562AT and the TSM101 controller.

This configuration uses an isolated feedback with an optocoupler and a secondary side reference/error amplifier, the TSM101, for voltage and current regulation.

The TSM101 includes two op-amps. One op-amp is used for constant voltage control and the other one for constant current control.

The L6562AT is a PFC controller operating in transition mode. The highly linear multiplier includes a special circuit which is able to reduce AC input current distortion, allowing wide-range mains operation with an extremely low THD, even over a large load range.

Efficiency is high at heavy load, more than 90% is achievable.

This system, designed using the L6562AT and the TSM101 controller, offers several advantages in terms of output current and voltage stability.

  • 所有功能

    • Mains voltage range: VACmin= 185 Vac, VACmax= 265 Vac
    • Minimum mains frequency: fL= 47 Hz
    • DC output voltage: Vout= 130 V
    • Maximum output current: Iout= 0.462 A
    • Minimum switching frequency: fSWmin = 57 Hz
    • Reflected voltage: VR = 195 V
    • Leakage inductance spike: Vspike= 100 V
    • Expected efficiency: 92 %
    • RoHS compliant