产品概述
描述
The L99MD01 is an octal half-bridge driver for automotive applications.
The device is intended to drive DC and/or stepper motors. Using the boost converter it’s possible to drive 4 stepper motors simultaneously. Without boost converter the system is able to run 3 stepper motors in sequential mode or 2 stepper motors simultaneously. The octal half bridge configuration allows also to drive 4 DC-motors simultaneously and 7 DC-motors sequentially.
The integrated 24 bit standard Serial Peripheral Interface (SPI) controls all outputs and provides diagnostic information: normal operation, open-load in on-state, overcurrent, temperature warning and overtemperature.
-
所有功能
- 8 half bridges
- RON = typ. 0.9 Ω (HS), 0.64 Ω (LS) @ Tj= 25 °C
- Current limit of each output at min. 0.8 A
- Intrinsic DC/DC step up converter driving an external MOSFET
- PWM mode option for all half bridges for hold current
- Internal PWM generation
- Two current monitor outputs
- SPI interface for data communication
- Temperature warning
- All outputs overtemperature protected
- All outputs short circuit protected
- VCCsupply voltage 3.0 to 5.3 V
- Very low current consumption in standby mode typ. 5 μA
- VSoperating range compliant: 6 V – 18 V
特别推荐
EDA符号、封装和3D模型
质量与可靠性
产品型号 | Marketing Status | 包 | 等级规格 | 符合RoHS级别 | 材料声明** |
---|---|---|---|---|---|
L99MD01XP | 批量生产 | PowerSSO 36 | 汽车应用 | Ecopack2 | |
L99MD01XPTR | 批量生产 | PowerSSO 36 | 汽车应用 | Ecopack2 |
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此,它们可能不是100%适用于特定的设备。有关特定设备的信息,请联系 销售支持。
样片和购买
产品型号 | 供货状态 | Budgetary Price (US$)*/Qty | 从ST订购 | Order from distributors | 包 | 包装类型 | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | Operating temperature (°C) | Operating Temperature (°C) (max) | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
最小值 | 最大值 | |||||||||||||
L99MD01XPTR | | | distributors 无法联系到经销商,请联系我们的销售办事处 | |||||||||||
L99MD01XP | | | distributors 无法联系到经销商,请联系我们的销售办事处 |
L99MD01XPTR 批量生产
L99MD01XP 批量生产