产品概述
描述
L9969S/L9969U and L9969T are single and dual integrated H-bridges for resistive and inductive loads featuring output current direction and supervising functions.
The PowerSSO24 houses one full H-bridge, while the PowerSSO36 houses both two H-bridges that can work in parallel, through independent input driving commands.
Target application ranges from throttle control actuators to exhaust gas recirculation control valves in automotive domain to a more general use to drive DC and Stepper motors.
-
所有功能
- AEC-Q100 qualified
- Full path RDS(on) less than 540 mΩ
- Nominal continuous load current > 3 A
- Operating battery supply voltage 4.5 V to 28 V
- Operating VDD supply voltage 4.5 V to 5.5 V
- All ECU internal pins can withstand up to 18 V
- Output switching frequency up to 20 kHz
- Monitoring of VDD supply voltage including bidirectional switch-off pin NABE
- Overtemperature and short-circuit protection
- Full diagnosis capability
- Output stage with SPI-adjustable current limitation 5-8.6 A in 3 steps (two-point regulation)
- Fast switch-off open-drain input/output
- Current-monitoring with current feedback output signal CF
- Reliable full diagnostic capability
- Settable chip-address via bond-wire configuration on the silicon or E-Fuse
- SPI-interface for configuration and diagnosis
- Error history in diagnosis register
- Two independent enable pins: "NABE" and "DIS"
- Control of power stages by SPI or two input signals, PWM and DIR (configurable via SPI)
- Logic levels 5 V compatible
- Conformity to improved EMC requirements due to smart H-bridge switching
- Full ISO 26262 compliant, ASIL-B (D) systems ready
EDA符号、封装和3D模型
样片和购买
产品型号 | 供货状态 | Budgetary Price (US$)*/Qty | 从ST订购 | Order from distributors | 包 | 包装类型 | RoHS | Country of Origin | ECCN (US) | ECCN (EU) | Operating Temperature (°C) (min) | Operating Temperature (°C) (max) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
L9969T-TR | | | distributors 无法联系到经销商,请联系我们的销售办事处 |
L9969T-TR 批量生产