产品概述
描述
The TS488 is a dual audio power amplifier capable of driving, in single-ended mode, either a 16 Ω or a 32 Ω stereo headset.
The TS488 eliminates pop and click noise and reduces the number of required external passive components.
Capable of descending to low voltages, it delivers up to 31 mW per channel (into 16 Ω loads) of continuous average power with 0.1% THD+N in the audio bandwidth from a 2.5 V power supply.
An externally-controlled standby mode reduces the supply current to 10 nA (typ.). The unity gain stable is configured by external gain-setting resistors.
-
所有功能
- Pop and click noise protection circuitry
- Operating range from VCC = 2.2 V to 5.5 V
- Standby mode active low
- Output power:
- 120 mW at 5 V, into 16 Ω with 0.1% THD+N max. (1 kHz)
- 55 mW at 3.3 V, into 16 Ω with 0.1% THD+N max. (1 kHz)
- Low current consumption: 2.7 mA max. at 5 V
- Ultra-low standby current consumption: 10 nA typical
- High signal-to-noise ratio
- High crosstalk immunity: 102 dB (F = 1 kHz)
- PSRR: 70 dB typ. (F = 1 kHz), inputs grounded at 5 V
- Unity-gain stable
- Short-circuit protection circuitry
- Available in DFN8 2x2 mm
电路原理图
EDA符号、封装和3D模型
意法半导体 - TS488
Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.
Please select one model supplier :
符号
封装
3D模型