LK112

批量生产
储存到myST

低噪声低压降稳压器，具有关断功能

下载数据手册
Order Direct
概述

产品概述

描述

描述

The LK112 is a low-dropout linear regulator with a built-in electronic switch. The internal switch can be controlled by TTL or CMOS logic levels. The device is on-state when the control pin is pulled to a logic high level. An external capacitor can be connected to the noise bypass pin to reduce the output noise level to 30 μVrms. An internal PNP pass transistor is used to achieve a low-dropout voltage. The LK112 has a very low quiescent current in on mode while in off mode Iqis reduced below 100 nA max. The internal thermal shutdown circuitry limits the junction temperature below 150 °C. Load current is internally monitored and the device shuts down in the presence of a short-circuit or overcurrent condition on the output.

  • 所有功能

    • Output current up to 150 mA
    • Low-dropout voltage (350 mV at IOUT= 150 mA)
    • Very low quiescent current:
      • 0.1 μA in OFF mode and max. 250 μA in ON mode at IOUT= 0 mA
    • Low output noise:
      • typ. 30 μV at IOUT= 60 mA and 10 Hz < f < 80 kHz
    • Wide range of output voltages
    • Internal current and thermal limit
    • Operative input voltage from:
      • VOUT+ 0.5 to 14 V (for VOUT> 2 V) or from 2.5 V to 14 V (for VOUT< 2 V)

精选 产品

特别推荐

产品

搜索历史

收藏

Please log in  to show your saved searches.

▼

您知道吗？

Please provide email

Please enter code

Congratulations!

Simple subscription

Congratulations!

x

您可以开始跟踪此产品，以便在新的资源、工具和软件可用时接收更新。操作很简单，只需要1分钟。

您可以开始跟踪此产品，以便在新的资源、工具和软件可用时接收更新。操作很简单，只需要1分钟。

您可以开始跟踪此产品，以便在新的资源、工具和软件可用时接收更新。操作很简单，只需要1分钟。

Invalid code, please check the code sent to your email address and validate again. In case you did not receive any code please select 'I did not receive code'

您可以开始跟踪此产品，以便在新的资源、工具和软件可用时接收更新。操作很简单，只需要1分钟。

请仔细阅读我们的隐私声明，了解我们将如何处理您的个人资料信息，以保障您个人数据的安全。

现在，您订阅了
- LK112

You can re-use the validation code to subscribe to another product or application.

Sorry, there was a problem on our servers. Please try again.
The current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.Marketing description of the package type.Compliancy of the device with industry requirement domains (IRD)The RoHS status of a product:
ECOPACK 1: Initial grade to identify European RoHS compliant products.
ECOPACK 2: New grade to identify brominated chlorinated and antimony oxide flame retardant free products.
ECOPACK 3: Halogen free RoHS exemptions free products.
(*): ECOPACK 2 version available upon request.
(**): Some versions still existing in ECOPACK 1 or not compliant.The current status of a product:
Active: Product is in volume production
Evaluation: Product is under characterization. Limited Engineering samples available
Preview: Product is in design stage
Target: Product is in design feasibility stage.No commitment taken to produce
Proposal: Marketing proposal for customer feedback.No commitment taken to design or produce
NRND: Not Recommended for New Design.Product is in volume production only to support customers ongoing production.Budgetary PriceMarketing description of the package type.Storage method used to contain product.Main country of assembly or fabrication of the product.ECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes. ECCNs are five character alpha-numeric designations used on the Commerce Control List to identify dual-use items for export control purposes.The value as specified by level (minTypMax) of the ambient temperature (in Cel) in which this item was designed to operate.The value as specified by level (minTypMax) of the ambient temperature (in Cel) in which this item was designed to operate.The value as specified by level (minTypMax) of the ambient temperature (in Cel) in which this item was designed to operate.