NUCLEO-C031C6

STM32C031系列NUCLEO板

NUCLEO-C031C6

STM32C031系列的NUCLEO板提供了ARDUINO Uno V3和ST morpho接口，同时把ST-LINK也集成在了同一块板子上，结合STM32 Cube,客户可以迅速的在ST的NUCLEO板上验证自己的方案。

STM32C0316-DK

STM32C031系列Discovry板

STM32C0316-DK

STM32C031x系列的Discovery板上面所有的STM32C031的管脚都可以通过DIP28连接器来连接，这套工具可以帮助从8位MCU到STM32C0和从STM32G0到STM32C0的设计迁移，DIP28的管脚排列尽可能的和ATMEG328的管脚兼容。

STM32C0116-DK

STM32C011系列Discovery板

STM32C0116-DK

STM32C011系列的Discovery板可以帮助客户尽快熟悉STM32C0的特性，她上面有一个DIL20的连接器连接到STM32C0 UFQFPN20的管脚上，方便客户开发和分享应用。

STM32U5 DK with 480*480 round display demo

STM32U5 DK驱动480*480圆屏的demo

STM32U5 DK with 480*480 round display demo

STM32U599; TouchGFX可以快速帮助客户达到智能手机的用户体验。在U599最新的2.5D硬件加速下，可以实现多种高阶的动画效果，如旋转，放大放小，支持矢量图和仿3D的特效。使用ST提供的免费软件TouchGFX可以让你快速的实现各种效果，让你的产品提升价值之外可以快速的切入市场。

STM32U5 DK with 800*480 display demo

STM32U5 DK驱动800*480液晶屏的demo

STM32U5 DK with 800*480 display demo

STM32U5最新的demo，驱动800*480的液晶显示屏。不仅支持U599的所有功能，还可以支持视频解码。释放你的无限想象力和创意。

STSPIN32F0 Four Rotor Drone Motor Control

STSPIN32F0 四轴飞行器方案

• Maximum speed: 2 polar motor 84000 RPM, 14 polar motor 12000 RPM
• Sensorless FOC sinusoidal current control technology；
• PWM modulation frequency of 28kHz, suitable for high-speed motors
• High integration suitable for mini design
• Integrated ARM M0 48MHz
• Integrated 3phase motor pre-drive, integrated 3.3V and 12V power supply
• Integrated with 4 high-speed rail to rail operational amplifiers and comparators

• 最高转速：2极马达84000RPM，14极马达12000RPM
• 无传感器FOC正弦电流控制技术；
• PWM调制频率28kHz，适合高速电机
• 芯片集成度高适合小型化设计
• 集成ARM M0 48MHz
• 集成三相电机预驱，集成3.3V和12V电源
• 集成4个高速轨到轨运放和比较器

 STM32 FOC Air-conditioning Fan Controller

STM32 FOC 空调风机控制器

• Sensorless FOC control, high efficiency, low noise
• Using single shunt, low cost
• Starting sampling open-loop, and switching to closed-loop FOC control through observer
• STM32F030 using ARM Cortex core，48 MHz
• STGIPN3H60 intelligent module low-loss MOS IPM, 1A, 500V
• Supporting 3.3V, 5V, 15V CMOS/TTL inputs

• 无传感器FOC控制，高效低噪声
• 采用单电阻采样，成本低
• 采样开环启动，通过观测器切换到闭环FOC控制
• STM32F030采用ARM Cortex内核， 48 MHz。
• STGIPN3H60 智能模块低损耗MOS IPM,1A500V
• 支持3.3 V, 5 V, 15 V CMOS/TTL 输入

STM32G4 Servo Controller

STM32G4伺服控制器

• FOC control, high efficiency, low noise, high reliability
• Servo control, encoder interface
• Supporting position control, torque control, or speed control
• STM32G431RB, 170MHz, Cortex-M4+

• FOC控制，效率高，噪声低，可靠性高。
• 伺服控制，编码器接口
• 支持位置控制，转矩控制或速度控制
• STM32G431RB, 170MHz, Cortex-M4+

STM32H750 Industrial HMI

STM32H750工业人机界面

• ARM Cortex-M7 STM32H750XB with ultra-high cost-effectiveness,
• On-board 128Mbit QSPI Flash and 64Mbit SDRAM;
• Rich peripheral interfaces, such as USB, UART, CAN, RS485, SD card, RJ45 (supporting 100 Mbps), etc;
• Using 4.3-inch capacitive touch display screen;
• Friendly HMI interface designed based on TouchGFX

• 采用意法半导体超高性价比的ARM Cortex-M7 STM32H750XB,
• 板载128Mbit QSPI Flash 和64Mbit SDRAM;
• 具有丰富的外设接口, 如USB,UART, CAN,RS485,SD 卡，RJ45(支持百兆)等;
• 采用4.3寸电容触摸显示屏;
• 基于TouchGFX设计的友好的人机交互界面

STM32G0 high speed motor driver

STM32G0 高速风机驱动

• STM32G0 high-speed fan driver
• High speed fan drive (10W rpm)
• FOC & PWM frequency 23kHz

• STM32G0 高速风机驱动
• 高速风机驱动 (10W转/秒)
• FOC & PWM 频率 23kHz

Qi Wireless Charger V1.2.4 - RX 50W

Qi 无线电源接收器RX (50W)

• Supporting 50W high efficient wireless Rx
• Supporting WPC Q1.2.4
• Overall efficiency > 98%
• Accurate current detection for FOD (foreign object detection)
• Q value detection

• 支持50瓦高效无线Rx
• 支持WPC Q1.2.4
• 整体效率大于98%
• 用于FOD(异物检测)的精准电流检测
• Q值检测

Qi Wireless Charger V1.3 – TX 50W

Qi无线电源发射器TX（50W）

• WPC Qi 1.3 and fast charge proprietary extensions
• Qi EPP with MP-A2 transmitter topology
• ARM 32-bit Cortex™-M0+ core up to 64 MHz
• Buck / Boost digital DC/DC + full bridge inverter
• 3x Half bridge drivers
• 1 ns resolution PWM generator (40 MHz PLL, 17-step DLL)
• USB-PD interface, patented fast PID loop, high-voltage & flash memory, USB PD, robust triple demodulation (I, V, Φ)
• Integrated I, V, Φ sensors and demodulators
• Compatible with STSAFE-A110 secure MCU for Qi 1.3 authentication

• WPC Qi 1.3 和50瓦快速充电专有扩展
• Qi EPP 带MP-A2 变送器拓扑
• 高达64 MHz ARM 32-bit Cortex™-M0 + core
• 降压/升压数字DC/DC + 全桥逆变器
• 3个半桥驱动器
• 1ns 分辨率PWM 发生器（40MHz PLL，17步DLL）
• USB-PD接口，专利快速PID回路，高压和闪存，USB PD，强大的三重解调（I、V、Φ）
• 集成I、V、Φ 传感器和解调器
• 兼容STSAFA100进行Qi 1.3 认证

3KW 5G digital Telecom power solution

3KW 5G数字通信电源方案

• Fully Digital AC-DC Power Supply
• Input AC Voltage range: 90 to 264 VAC
• Input AC Frequency: 47Hz to 63Hz
• DC Output voltage: 53.5 VDC
• Peak efficiency > 96.5% @230VAC
• Power factor >0.99 @ 100% load
• iTHD <5% when >50% load
• Power density: 40 W/in3
• Peak inrush current <30A
• Dimension: 100mm*310mm*41mm

• 全数字AC-DC电源方案
• 输入交流电压范围：90 to 264 VAC
• 输入交流频率范围：47hz to 63hz
• 直流输出电压：53.5VDC
• 峰值效率达到96.5% (230VAC)
• 功率因子> 0.99（100%负载）
• 总谐波失真<5%（>50%负载）
• 功率密度：40 W/in3
• 峰值涌入电流<30A
• 外形尺寸：100mm*310mm*41mm

Power Modules for 3-Phase Motor Drive​​​​​

-

Thanks to very high flexibility the ACEPACK​™ power modules enable developers to implement several topologies with different power switching devices (such as IGBT and Power MOSFET in silicon and MOSFET in silicon carbide).

-

STPOWER SLLIMM HP​​​​​

-

The SLLIMM™ HP (High power) product line extends our established STPOWER SLLIMM™ portfolio to address applications up to 7kW

-

Anomaly detection on water pumps with NanoEdge AI ​​​​​​

基于NanoEdge AI的水泵异常检测解决方案

This solution shows how to detect the anomalous behavior of the pump in relation to the dynamically learned model, based on the detection of the vibration generated by the pump, and calculate the anomaly based on a pre-trained AI model created with NanoEdge AI Studio.​

该解决方案展示了如何对泵所产生的振动进行检测，以及检测泵相对于动态学习模型的异常行为，并基于NanoEdge AI Studio创建的预训练AI模型计算异常。

STSPIN32F0 Motor Control Board

STSPIN32F0马达控制方案

Input Voltage: 9-40Vdc
• Power Range: <500W.
• Control Method: Sensor-less FOC Vector Control
• Speed: (Depend on motor)
• Protection: Over-voltage, Over-current, Under-voltage, Over-temp and Stall

• 输入电压: 9-40Vdc
• 功率范围: <500W.
• 控制方式: 无感FOC矢量控制
• 速度: （与电机相关）
• 保护特性: 过压、过流、欠压、过温和失速

STSPIN32G4 Motor Control Board

STSPIN32G4马达控制方案

• Input Voltage: 10-75Vdc
• Power Range: <500W.
• Control Method: Sensor-less FOC Vector Control
• Speed: (Depend on motor)
• Protection: Over-voltage, Over-current, Under-voltage, Over-temp and Stall

• 输入电压: 10-75Vdc
• 功率范围: <500W.
• 控制方式: 无感FOC矢量控制
• 速度: （与电机相关）保护特性: 过压、过流、欠压、过温和失速

STM32G4 DC-DC Digital Power solution

基于STM32G4的DC-DC数字电源方案

• Input Voltage: 9-40Vdc
• Output Voltage: 5V/12V/18V/24V (set by switch)
• Output Current: 10A (max)

• 输入电压: 10-40Vdc;
• 输出电压: 5V/12V/18V/24V (通过开关设定)
• 输出电流: 10A (max).

WAEVK-PWD5T60

WAEVK-PWD5T60

High Voltage Low Cost Small Volume Motor Drive Solution

高压低成本小体积电机驱动解决方案

7’ TFT HMI Base STM32H7

7’ TFT HMI Base STM32H7

This solution is based on STM32H7 and ST1S14PHR for industrial process control and human-computer interaction interface of intelligent home.

方案基于STM32H7和STS14PHR，应用于工业处理、 人机交互和智能家居的人机界面

STM32MP157 SoM

STM32MP157 SoM

The core board is built on STM32MP157CAA3、
STSAFA110DFSPL02、DDR3、eMMC and uses DDR3 SODIM Socket

SODIM结构的STM32MP157核心板

NUCLEO-H503RB

STM32H503系列NUCLEO板

NUCLEO-H503RB

适合原型制作的经济型开发板
USB，Arduino uno接口，64引脚MCU

NUCLEO-H563ZI

STM32H563系列NUCLEO板

NUCLEO-H563ZI

适合原型制作的经济型开发板
USB，以太网，Arduino uno接口，144引脚MCU

STM32H573I-DK

STM32H573系列Discovery板

STM32H573I-DK

多连接套件
USB，以太网，MicroSD，显示屏，512 Mbit Octo SPI flash，音频，多扩展接口，176引脚MCU

NUCLEO-WBA52CG

STM32WBA系列Nucleo板

NUCLEO-WBA52CG is a Bluetooth® Low Energy wireless and ultra-low-power board embedding a powerful and ultra-low-power radio compliant with the Bluetooth® Low Energy SIG specification v5.3.
The ARDUINO® Uno V3 connectivity support and the ST morpho headers allow the easy expansion of the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.

NUCLEO-WBA52CG是一款超低功耗的蓝牙开发板，内置符合蓝牙低能耗SIG规范BLE 5.3的STM32WBA52低功耗蓝牙芯片。
ARDUINO®Uno V3的连接支持以及ST morpho接口能轻松扩展STM32 Nucleo开放开发平台的功能，且具有广泛的专业保护选择。

22kW High-End Servo Drive With SIL2

符合SIL2标准的22kW高端伺服驱动解决方案

This solution provides a system consisting of driving a motor by a 22kw servo drive - control board and a PLC designed to meet the SIL level.​

该解决方案提供了驱动电机的22kw伺服驱动控制板和PLC控制器组成的系统，其设计满足SIL2标准。

600W Commercial Fridge solution - Single STSPIN32G0601 controls Digital PFC + PMSM Compressor

600W商业冰箱解决方案 - 单个STSPIN32G0601控制数字PFC和永磁同步压缩机

The demo is a panel where it is graphically represented a refrigerator circuit, backlit by RGB LEDs which shows the gas path inside the pipes, driven by a compressor. The path color changes depending on the gas temperature in a specific part of the circuit. The demo is a 3-phase inverter power board with digital PFC based on the STSPIN32G0601 and equipped with 6pcs STGF10M65DF2 IGBTs. It provides a reference design for compressor drivers used in a wide range of applications.

该演示板以图形方式展示了冰箱电路。通过RGB STGF10M65DF2 IGBT。它为在广泛应用中使用的压缩机驱动器提供了参考设计。

Smart sensing augmented with NanoEdge AI and STWIN.box

采用NanoEdge AI和STWIN.box增强型智能传感解决方案

This demo shows equipment status monitoring using a STWIN.box intelligent sensor processing unit (field-ready industrial intelligent sensor node) and its expansion board, STEVAL-C34KAT2, all connected to EVLSPIN32G4-ACT, board based on STSPIN32G4 system to control the three-phase brushless motor used in the demo. All setup, incorporates a machine learning library, NanoEdgeAI Studio, to detect engine anomalies and send the results to a GUI.

该方案展示了使用STWIN.box智能传感器处理单元（现场就绪的工业智能传感器节点）及其扩展板STEVAL-C34KAT2进行的设备状态监测，所有扩展板均连接到基于STSPIN32G4系统的EVLSPIN32G4-ACT板，以控制演示中使用的三相无刷电机。所有设置都包含一个机器学习库NanoEdgeAI Studio，用于检测引擎异常并将结果发送到GUI。

High-Performance power tool reference design​​​​​

高性能电动工具参考方案

The demo is designed to control a BLDC/PMSM motor, and it works on the standard set of inputs such as throttle to control the motor torque/speed and to deliver power up to 250W. This reference design is ideal for high performance motor control applications such as drill machines, grinder, disc cutters, circular saws leaf blowers, handheld mowers.

该方案演示了在控制无刷直流电机/永磁同步电机，在一组标准输入（如油门）上工作，以控制电机扭矩/速度，并提供高达250W的功率。此参考设计非常适合高性能电机控制应用，如钻机、研磨机、圆盘切割机、圆锯吹叶机、手持式割草机。

Maze Game V2​​​​​

二代迷宫游戏解决方案

The demo is a motorized game that allows the player to control the tilt of a plate to move a ball through the maze. The inclination of a surface is controlled by the activation of 2 motors which receive the command via EtherCAT Real Time. A pad equipped with an inertial sensor is used by a user who can play to move a ball along the maze. A Camera detects the position of the ball to create an automatic path.

该演示是一款电动游戏方案，玩家可以控制板的倾斜，使球穿过迷宫。迷宫平面的倾斜通过2个电机来控制，这些电机通过EtherCAT实时接收命令。装有惯性传感器的控制板可以被用户用来沿着迷宫路径来移动球。还有摄像头可以检测球的位置以创建自动路径。

20W dual motor FOC control

20W双电机FOC控制

1. Adopt FOC; non-inductive sampling algorithm, can control dual motor drive at the same time, adopt 18KHZ FOC; non-inductive sampling algorithm, can dual motor asynchronous control, the lowest speed is 100rpm, high speed can reach 4000rpm, MCU built-in 4PGA,7comp, reduce the area of the peripheral circuit, suitable for intelligent device chassis. Double motor servo gear products, etc
2. ST Workbench software was used to design motor drive parameters.

1.采用FOC; 无感采样算法，可以同时控制双电机驱动，采用18KHZ FOC; 无感采样算法，可以双电机异步控制，最低速100rpm，高速能达到4000rpm，MCU内置4PGA,7comp, 缩小外围电路面积，适用于智能设备底盘，双电机伺服舵机产品等
2. 采用ST Workbench软件设计电机驱动参数 。

Injection molding machine controller

注塑机控制器

1.Chip features: main frequency up to 400Mhz, rich peripherals, high reliability, stable performance;
Advantages: Integrated analog input/output, digital input/output, temperature control, fieldbus interface (EtherCAT, EtherNet, CAN, RS485, RS422), position feedback interface (A/B/Z, SSI), servo shaft control interface hydraulic system controller.
2. Mainly for high-performance horizontal/vertical injection molding machine, oil electric injection molding machine, full electric injection molding machine and other industry applications.

1芯片特点：主频高达400Mhz，外设丰富可靠性高，性能稳定； 优势：集成 模拟输入输出、数字输入输出、温度控制、现场总线接口（EtherCAT、EtherNet、CAN、RS485、RS422）、位置反馈接口（A/B/Z、SSI）、伺服轴控制接口的液压系统控制器。
2.主要面向高性能卧/立式注塑机、油电注塑机、全电注塑机等行业应用 。

Edge AI Washing Machine

边缘人工智能洗衣机

This demo shows how AI can help classical motor control appliance to achieve new breakthrough levels of energy and water efficiency, by providing a more accurate measurement of clothes weight. The AI model generated by NanoEdge AI studio greatly improves the measurement accuracy compared to traditional algorithms by analyzing and learning the features of current signals.

该Demo展示了AI如何通过提供更准确的衣服重量测量, 帮助经典的电机控制设备达到更高的节能与节水等级。由NanoEdge AI Studio 生成的AI模型通过对电流信号进行特征分析与学习，使测量精度相对传统算法得到大幅提升。