STGIB15CH60TS-XZ

已停产
Design Win

SLLIMM第2系列IPM,三相逆变器,20 A,600 V,短路保护IGBT

下载数据手册

产品概述

描述

另一系列的SLLIMM(小型低损耗智能成型模块)采用简单、坚固耐用的设计,可提供紧凑型高性能交流电机驱动。它将全新的意法半导体专利控制IC(一个LS和一个HS驱动器)与改进的短路保护沟槽栅场截止 (TFS) IGBT相结合,使其成为在硬开关电路中操作高达20 kHz的电机驱动器的理想选择。

  • 所有功能

    • IPM 20 A 600 V三相IGBT逆变桥包括2个用于栅极驱动和续流二极管的控制IC
    • 带滞回的3.3 V、5 V TTL/CMOS输入
    • 内部自举二极管
    • 栅极驱动欠压锁定
    • 智能关断功能
    • 短路保护
    • 关断输入/故障输出
    • 单独的开路发射极输出
    • 内置温度传感器
    • 用于故障保护的比较器
    • 短路保护TFS IGBT
    • 超快速软恢复二极管
    • 85 kΩ NTC,UL 1434,CA 4认证
    • 全隔离封装
    • 隔离额定值1600 Vrms/min
    • UL认证:UL 1557,文件E81734
    • 嵌入TVS以增强ESD保护

eDesignSuite

eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.

Power Management Design Center

Thermal-electrical Simulators for Components

Signal Conditioning Design Tool

NFC/RFID Calculators

Choose design tool:

Power Supply Design Tool

SMPS design, by topology, by type and by product
PFC design with analog and digitial control
Supports various PCB configurations
Choose type:
DC/DC
AC/DC
太阳能电池充电器

LED Lighting Design Tool

Handles AC-DC and DC-DC design in common topologies
Displays interactive and annotated schematic
Provides current/voltage graphs, Bode plots, efficiency curves and power-loss data
Choose type:
DC/DC
AC/DC

Digital Power Workbench

Provides a step-by-step optimized design of power section and control loop
Generates the STM32Cube embedded software package for custom applications and allows firmware project generation, compatible with multiple STM32 IDEs

Power Tree Designer

Specify input/output power for each node in the tree
Check for consistency
Design each individual node
Choose design tool:

AC Switches Simulator

Select ratings and application waveforms
Get junction temperature and blocking voltage graphs
Search and sort suitable devices

Rectifier Diodes Simulator

Select ratings and application waveforms
Estimate power losses
Search and sort suitable devices

STPOWER Studio

Supports long mission profiles
Provides power loss and temperature graphs
Helps define heatsink thermal properties

Twister Sim

Help select the right ViPOWER Automotive power device
Supports load-compatibility, wiring harness optimization, fault condition impact and diagnostic analysis
Supports various PCB configurations

TVS Simulator

Specify system ratings and surge waveform
Search and sort suitable devices

Estimate

Build simple schematics and firmware inputs in minutes
Quickly generate reliable estimates of battery life, system power consumption and bill of materials costs
Choose design tool:

Active Filters

Handles multi-stage-designs and common topologies
Returns circuit component values
Provides gain, phase and group delay graphs
Low Pass, High Pass and Band Pass

Comparators

Handles most common configurations
Returns circuit components values
Provides I/O signal waveforms
Inverting, Non Inverting, Window

Low side Current Sensing

Returns circuit component values
Provides current error graphs

High side Current Sensing

Provides current error graphs.
Help to select the right High side current sensing and shunt devices.
Choose design tool:

NFC Inductance

Input geometry and substrate properties
Get antenna impedance

UHF Link Budget

Enter forward and reverse link characteristics
The tool returns link budget estimate

NFC Tuning Circuit

Enter antenna parameter and matching target
Select the topology of the matching network
The tool returns component values for the desired design targets

EDA符号、封装和3D模型

STMicroelectronics - STGIB15CH60TS-XZ

Speed up your design by downloading all the EDA symbols, footprints and 3D models for your application. You have access to a large number of CAD formats to fit with your design toolchain.

Please select one model supplier :

Symbols

符号

Footprints

封装

3D model

3D模型